Independent pre-shipment inspection · Zhejiang, China
Catch the defects your customers would review, before the goods leave the factory.
I inspect insulated bottles, tumblers and lids at your factory in Zhejiang, test them, and send you the evidence: photos, measurements and a clear pass or fail, within 24 hours.
Many drinkware complaints start at the factory
Chipped coating, lids that won't seal, bottles that stop keeping heat. These problems usually show up first in reviews and returns. Many of them can be caught in a sample taken from the finished, packed goods.
Coating
Chips at the base edge, peeling, colour mismatch. Checked by eye and with a cross-hatch adhesion test.
Lids and seals
Gaskets not seated, cracked hinges, threads that bind. Every sampled lid is opened, closed and inspected.
Insulation
Units that lost their vacuum feel warm on the outside within minutes. Hot-fill checks find them before your customers do.
How it works
Book when production is finished and at least 80% packed. You arrange access with your factory. I do the rest.
Send the order
Product spec, PO quantity, factory city and ship date. I reply with a fixed quote within one business day.
I inspect on site
Random cartons chosen by me, sampling per ISO 2859-1 (AQL), visual checks and function tests.
You get the report
Within 24 hours: defect counts, test results, photos and short videos of every finding.
You decide
Release, rework or sort. If the factory reworks, I can re-inspect the sorted goods.
What I check on insulated drinkware
The checklist is agreed with you before the inspection and adjusted to your product and spec.
- Quantity and packingCartons counted against the packing list, carton marks, barcodes scanned.
- WorkmanshipCoating, print, dents, scratches, welds, sharp edges, cleanliness inside.
- Heat retentionHot water at 95 °C, lid closed, temperature read at your specified hours.
- Vacuum checkOuter wall temperature after a hot fill, to find units that lost vacuum.
- Leak testFilled, closed and held upside down; lids and straws checked one by one.
- Coating adhesionCross-hatch tape test (ASTM D3359) on the areas that chip in use.
- Lid fit and functionThread engagement, gasket seating, hinges, locks and sliders.
- Capacity, size, weightMeasured against your spec and tolerances.
- OdourHot rinse, then checked for abnormal smell from coating or plastics.
- Carton dropDrop sequence on a packed carton to check the packaging protects the product.
Evidence, not just a pass or fail
Every defect in the report has a photo or video. Each factory also gets a running record, so you can see whether defect rates go up or down from one lot to the next.
The sample uses illustrative data to show the format. It is not a report on a real brand or factory.

About
I'm Shawn Gao. I started Firsthand QC in Hangzhou in 2026 to do one job well: check drinkware before it ships, and show the evidence.
The person you email is the person who goes to the factory and writes your report. My family runs an injection-molding business, so plastic lids, seals and tooling are familiar ground, and I've also worked in 3D printing and apparel.
I'm paid only by the brands I inspect for. I don't take fees or commissions from factories.
Get a fixed quote
Email me with:
- Product and spec (a link or PDF is fine)
- Order quantity and planned ship date
- Factory city
I reply within one business day. WhatsApp or a video call are available on request.